Steyr Club Forums banner

Steyr SSG 69 Scope Mount

2887 Views 9 Replies 5 Participants Last post by  Vetrep
Looking for scope mount Steyr SSG 69 Scope mount and 30 MM Rings.
I'm relatively new to this forum and I have exhausted all my search efforts.
Any help would be appreciated.
1 - 10 of 10 Posts
I believe the same ones that will fit on tika rifle will work on the 69.
You may wish to talk with Jeff at SAI USA . Or Andy from Andy's Leather.
They are both great Sources of knowledge.
I believe the same ones that will fit on tika rifle will work on the 69.
You may wish to talk with Jeff at SAI USA . Or Andy from Andy's Leather.
They are both great Sources of knowledge.
Thank you, I'll follow up on this this week. Much appreciated.
  • Like
Reactions: 1
Tally makes 30mm rings for the SSG 69. They are a great option if original Steyr rings cannot be found.


Best of luck!
  • Like
Reactions: 1
Tally makes 30mm rings for the SSG 69. They are a great option if original Steyr rings cannot be found.


Best of luck!
Tally makes 30mm rings for the SSG 69. They are a great option if original Steyr rings cannot be found.


Best of luck!
Thank you for the assistance, Out of stock but hopefully soon.
Wayward Son, Thank you for your help, found the Tally on Amazon. Worked perfectly!
  • Like
Reactions: 1
I believe the same ones that will fit on tika rifle will work on the 69.
You may wish to talk with Jeff at SAI USA . Or Andy from Andy's Leather.
They are both great Sources of knowledge.
I have finally found a tolly set that will work , Thank you
  • Like
Reactions: 1
Looking for scope mount Steyr SSG 69 Scope mount and 30 MM Rings.
I'm relatively new to this forum and I have exhausted all my search efforts.
Any help would be appreciated.
I'm not sure if you've found your answer but I purchased a picatinny base for my SSG a few years back from XS sights. They didn't list it in any catalog but had heard that they manufactured one. Made a phone call to them and ordered. Very well made. It slide into the dovetails of the receiver with the help of a block of nylon and hammer. Tight fit! There is a set screw in each end of the rail to draw it tight to the receiver. Hasn't moved in the time I've had it. They may still manufacture it if you check with them.
What size and type of scope ring screws are used with the steyr ssg 69?
6-40 3/8 torz ?
1 - 10 of 10 Posts
Top