Steyr Club Forums banner

slide and polymer cleaning?

1996 Views 9 Replies 6 Participants Last post by  mod06
Couple other questions Gents,
As you all know the MA1-40 slide kinda has a green color to it which I really like. Real new at this and didnt know if any of the cleaners/oils will cause discoloration or anything. And any preferred polymer cleaner? Once again, thanks for all the advise. :)
1 - 1 of 10 Posts

Simple Green sprayed on generously, warm water to wash it back off and compressed air to get all the water back out and off. Breakfree to relube it and coat it...wipe all excess off and you're good to go. Barrel cleanin' has its own techniques, but I still like to spray a little Breakfree on it and in it, wiping all the excess back off and running a patch through the barrel, leaving a thin coat of lube to ease the first round through the bore. Works every time. <shrug> Any questions?

1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.