Steyr Club Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
I had the failure to go into battery problem,and I found out what causes it.I have done this adjustment and it cured both my S40 and my M357.Follow these links: http://www.glocktalk.com/showthread.php ... did=441962
http://www.steyrclub.com/modules.php?na ... opic&t=671

Read the one I listed second all the way through before clicking on the first one-Sorry,I was thinking backwards.To answer my own question,once you remove enough of the rails(not very much,don't go nuts) there is no longer any contact between the affected parts.I have put 700 rds through my M357 since the last time I did the buff job on the center rails and they do not need any more-100% functional all the way.If you have any questions PM me on the Glocktalk Steyr forum.Good Luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top