[anon966947]

Hey Everyone,

New to the forum. I have a brand new M9A2 that I've had for a few months. I disassembled it out of the box to understand how it worked and took it to the range for the first time a few weeks ago. When I got home after a day at the range (probably put 100ish rounds through it), I can't disassemble it. When I push in the button on the side and slide the lever down into the disassemble position, the slide moves forward about 5 mm, but won't move forward beyond that. If I pull it back while holding the lever down, it goes back to the same position.

Any idea what I can do to get it disassembled? I can't clean it and I'm worried about using it again until I can get it taken down and ensure the action is working.

 

[anon966947]

Did you pull the trigger to decock? Clear for safe, and drop the striker, then push the button and rotate the lever down.

That did it. Now I feel like an idiot, but way less than I would have if I had to slink into my local gunshop for help, so thanks for the assist. I'll be re-reading the manual in case there's anything else I "forgot" in there...