Steyr Club Forums banner
1 - 12 of 12 Posts

·
Premium Member
Joined
·
1,470 Posts
Discussion Starter · #1 ·
I am curious what you use for a mag/clip holder for your Steyr pistol.
Or what else matches up for a fit.
Double or single, leather or plastic, open or snap/velcro?
 

·
Premium Member
Joined
·
5,073 Posts
I use a Blade-Tech kydex single mag carrier and couldn't be happier - works great, it's really comfortable, and easy to take on/off.

 

·
Premium Member
Joined
·
1,470 Posts
Discussion Starter · #5 ·
Well, I had a 10% off evilbay coupon, so I ordered 2 of the Fobus 6900 double mag holders from a guy. Was about $40 for both. They should be in next week.
I also have been using a generic uncle mike's Velcro and a snap double mag holder but want something open to grab quick.
I was given a Bianchi double mag pouch with snap cover and find it fits a little to snug for my taste. Great holder as its compact but the mags have no room between to easily grab.

Picts on the way!! My M40A1 in my Stingray and the Fobus as well as my GB!!
 

·
Premium Member
Joined
·
1,470 Posts
Discussion Starter · #6 ·

·
Premium Member
Joined
·
2,652 Posts

·
Premium Member
Joined
·
1,470 Posts
Discussion Starter · #8 ·

·
Registered
Joined
·
19 Posts
If you are going for a conceal carry holster I'd recommend a ubg inside the waistband holder I wear one with my M9A1 15 shot magazine I would recommend the manufacturer because it takes a bit longer but the quality of the mag holsters and his holsters for steyr pistols are great with great help if you ever need it.

http://www.ubgholsters.com/products.html
 

·
Premium Member
Joined
·
1,470 Posts
Discussion Starter · #10 ·

·
Registered
Joined
·
2 Posts
All,
Just started IDPA ( again ) and was looking to update my rig for an M9. My M9 runs great, and have some of BT’s upgrades, blade tech holster is solid but wanted some nice single mag holsters. Could not find any I really liked so I modified some made for the other Austrian pistol.

I started with a Safariland 773 mag holster for glock 17/22. Then replaced the rollers with a 15/16 inch long section of 17.5 mm diameter rubber tube ( I found spear fishing bands to work great).

The setup works really well. Mags don’t move and the rubber tube has the added benefit of acting like a tensioning system, the more the rubber tube is squeezed, the greater the tension against the mag.

Some pix.
4471CED6-774A-439F-909D-B2B86775327A.jpeg
2F4455C5-0C38-4452-9BE6-0149AD59D654.jpeg
C903ED57-126F-41E9-A3C8-927EAC5A9C30.jpeg
B1E19799-CF04-4147-834B-70EB20CFD17C.jpeg

Hope this helps…
 
1 - 12 of 12 Posts
Top