Has anyone noticed that the "weight" has a beveled side to it? I have put the beveled side down, towards the spring, I hope this is correct. Any input is appreciated. I did not notice this when I first took it apart but since then I have always made sure that the beveled edge is down and in contact with the spring. I have not had any of the problems as described by others and now have 700 trouble free rounds. My G30 had its first FTF (failure to feed) out of about 1000rnds. I did notice that the spring is somewhat difficult to get off the rod but I have yet to have any problems. If you could let me know about this weight and how it is correctly installed, I would greatly appreciate it.