Steyr Club Forums banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
232 Posts
Discussion Starter #1
I have read quite a bit regarding an extractor upgrade on the M9-A1 as well as firing pin issues on several hundred M9-A1's. So here is my question. Were there any similar upgrades/issues with the original M9/S9 models? I cannot seem to find anything specific regarding M9/S9 upgrades or issues. Am I missing something? Thanks guys. :D


Bittrich
 

·
Registered
Joined
·
133 Posts
When I first got my M9, I had read quite a bit about the extractor issues and was worried that I might have them too. My fears were unfounded, as mine has the old stlye extractor and none of the problems often mentioned. The LCI in mine still has a pointed tip too.
I had even contacted Jeff @ SAI and was told to shoot it first before replacing anything. Not sure about any issues with the S9's.
 

·
Registered
Joined
·
240 Posts
My new S9-A1 had a few FTE issues at first but the different extractor Jeff sent me has made the gun very consistent. The FTEs cleared up on their own even before the new extractor was installed but the ejection was erratic.
 
1 - 3 of 3 Posts
Top