[King]

Suggesstions please regarding how can i change/replace my trapezoid sights at home

 

[AUGop41]

Should be doable with a brass punch and vise but I would borrow a sight pusher. Don’t know how difficult moving that trapezoidal sight might be with a punch though

 

[wbbh]

I ended up buying an MGW Sight Pro. I replaced two sets of sights and installed a red dot holder on another slide. I found the factory sights all very difficult to get moving.

 

[AUGop41]

Awesome thanks for the heads up. I figured they would be tight

 

[schgsd]

Awesome thanks for the heads up. I figured they would be tight

WBBH is right. They are stinkers to get out and a punch leaves you open to marring the slide.
I have done all mine with a pusher as well.

 

[King]

Ill try to borrow a pusher

 

[Case]

They have to be pushed from left to right. Use a plastic punch and remove the AllenHead screw from the rear sight 1st. . Also if it's the 1st time doing them there is some super glide under the sight.