Steyr Club Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·


It seems like every week there's a question about how to do a 10mm conversion on a G21 or G30 (process is basically the same as below...). So I decided to do a little video explaining how to do it and demonstrate the difference in firepower you'll achieve while doing so.

Gun:
Generation 3 Glock 21SF with 1913 rail
Parts used for the conversion:
-KKM 6'' 45-10mm conversion barrel
-LWD 10mm extractor (KKM recomends modifying a stock 45acp extractor however; more on this in the video below)
-LWD stainless guide rod with 20lb recoil spring (vs 17lb factory set up)

Here's a video that will show how the gun shoots with the standard set up, 10mm conversion setup (with multiple types of ammo), a demonstration showing how to install the conversion parts, and chronograph tests with both setups of the gun showing the power difference with the 6'' KKM barrel.

[video=youtube;Dt8s8d3RI4U]http://www.youtube.com/watch?v=Dt8s8d3RI4U&feature=g-upl[/video]

Chrono data for the 45ACP:
-Federal HST 230gr JHPs: 817fps, 341 ft/lbs
-Winchester Ranger 230gr JHPs: 896fps, 410 ft/lbs

Chrono data for the 10mm:
-Underwood 155gr Gold Dot JHPs: 1587fps, 866 ft/lbs energy
-Blazer 200gr TMJ: 1098fps, 535 ft/lbs energy
 

·
Registered
Joined
·
632 Posts
I thought I uploaded my glock 20 10mm video, guess not. haha. =)

Why convert, get the real deal. :p
 

·
Premium Member
Joined
·
1,690 Posts
Got the KKM 10mm conversion barrel too, excellent, like 10 conversion better then the g20
 

·
Registered
Joined
·
632 Posts
Got the KKM 10mm conversion barrel too, excellent, like 10 conversion better then the g20
I cannot stand Glock anymore.

yeah, they are a good pistol, but it is like people are brainwashed and dont see past a glock after they get in glock tard mode.

Should trade my Glock 20 in for a Caracal F.
 
1 - 4 of 4 Posts
Top