Steyr Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 23 Results
  1. Other Rifles
    Are the triggers the same for the Model M/S/L the same as the SSG 69? I picked up an older Model M '06 yesterday with the type 1 non adjustable trigger. It would be fine for bench work but at under 1.5 pounds its too light in general. Steyr said I could buy the type 2 for bukoo bucks, but I see...
  2. Tactics and Training
    Today I got in the mail my ASG Airsoft Steyr M9 pistol. I have been watching eBay for some time and they came back into stock. So far so good. I have open the box, fondled it a bit, and read the brief instructions. The piece is very well built, steel frame makes it heavier than a real unloaded...
  3. M, C, L and S Series
    I have a quick question.. I recently bought a 2011 M9-A1 to replace my M40-A1 (not a fan of the recoil of the m40-a1). When I was cleaning it for the first time (I always clean and oil a gun before I shoot it for the first time) I noticed that when I took out the extractor and the extractor...
  4. M, C, L and S Series
    TL,DR: I need a barrel for the Steyr M9 that is >6" and makes the overall length of the handgun >10.5". Do they make those? Hi guys, I live in the great People's Republic of California, where we have a roster of approved handguns. Because this requires the manufacturer to submit numerous...
  5. M, C, L and S Series
    I will be honest I was concerned about getting another 40 S&W after my Glock but someone local had an S40 for sale at a great price and I decided to jump on it. The trip to the range I kept going over about how my Glock felt with the 40 and was wondering even before I shot it if I had made a...
  6. M, C, L and S Series
    So, I was showing my new M9-A1 to my friends the other day and they both started laughing. Then, one of them said "It's a man licker!" They laughed for a good long while. This made me think that sales of Steyr products in the U.S.A. would likely surge if the word MANNLICHER was left off all...
  7. M, C, L and S Series
    So I am still waiting for my Steyr Ma1 40S&W to show up... but it should be here by V-day just in time to impress the wifey.. I mean sneak it into my gun safe without her noticing. So my evil Twin has all of our Steyr goods and received all of the BT's goodies I purchased. So anyhow according...
  8. M, C, L and S Series
    Hi guys. I am on the verge here of picking up an M9-A1. Here is/are my issue(s); I find the trap sights on this weapon to be unique and exceptional, however I have 2 worries. First, I put night-sights onto all of my pistols (and in some cases a laser as well) and I really feel this is quite an...
  9. New Member Introductions
    After quite a bit of shopping around, I settled on the C9-A1 as my first quality pistol. I have owned a Hi-Point C9 I'm in the process of selling, and a little Phoenix HP22A that makes a dandy pocket pistol, bot nothing "name brand" or approaching the quality of the Steyr. So, here's a couple...
  10. Holsters
    Custom order here from Josons and I cannot say enough about it. Ive waited a few weeks to post so I could field check everything and I love this holster! I contacted Josons about making the holster, sent him my specs, and had the set-up in hand by the end of the week! This holster Can be used...
  11. Holsters
    I just got C9-A1 and am looking for an IWB holster. I happened to come across this holster on ebay and was wondering what you all thought. It's basically a crossbreed knockoff, but the price is right for me and they have 100% feedback, so most people seem to be happy. Any thoughts...
  12. M, C, L and S Series
    Like I mentioned in a previous post, I'm looking at the S9-A1 to replace my PF9. On the PF9 the slide stop is a stop only and can not be used to release the slide once a new mag is inserted. Does the slide stop on the S9-A1 operate as a release or does it work like the PF9?
  13. Caracal C and F Series
    Saw a Caracal F today at a gun show in Dallas. While the trigger is diffinitely lighter than the M9; however, I don't like movement of the slide when the trigger is pulled. I was planning to get a Caracal C but all they have is a Full side for $469. The fit and finish of this gun, based on the...
  14. Other Handguns
    Dragged this one home fully knowing it had issues and after completely striking out with my weak internet search fu I got here. The gun. Steyr GB You know them , some of you love them. The issue. When the slide is racked it barely misses cocking the hammer so the hammer followes...
  15. M, C, L and S Series
    Hi gang- Put 200 rnds thru my new M9 A1 (PW Arms) today. I cleaned,lubed and worked slide per members' suggestions. Here's what I observed: -Used WWB and Federal. No ftf's, no fte's, only 1 failure to fire- Federal. -I mixed ammo among 4 Steyr 15 rnd mags- no mag issues. -More accurate than I...
  16. ...

    Industry News
    no to go super politico but if a democrat administration did this, it would be all over the news as the gop used it to further label the dnc as anti gun nazis.
  17. M, C, L and S Series
    Well, I gave up on my S40. :cry: Took it out and shot it. 15 trigger screw ups out of 50 rounds didn't make for a fun shoot. I read the thread on the sticky trigger. Here was my problem. If I disassembled and doctored the gun and screwed it up worse, I couldn't take it back. With tax, I had...
  18. M, C, L and S Series
    I got my M9 today, opened the box and got a big surprise! At first I thought the dealer had misassembled the gun because the barrel was sticking out half an inch like a Beretta 92. Ug-ly! Then, after reviewing the owner's manual, cycling the action and taking off the slide, I came to the...
  19. M, C, L and S Series
    When I bought my M40, the former owner had polished the entire slide. Sights attatched and all. So I have shiny sights. It makes shooting in bright conditions a bit weird. I'm not sure how I'd properly refinish the sights without covering the white markers. Anyone have any tips?
1-19 of 23 Results
Top