Steyr Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. M, C, L and S Series
    I purchased a pre-owned M40-A1. The first 2 mags I went through were a nightmare. After the pistol fired, the trigger would not be able to be pulled again to fire another round. I would pull the trigger and there was no click. I would then have to slightly pull back on the slide and release in...
  2. M, C, L and S Series
    Out today for some training work with my L9A1. It's a May 2013 model with rollpin and loaded chamber indicator. I've put about 150 rounds through it before today. After about four magazines, I encountered a malfunction where the trigger would not function. Action fully in battery. Round...
  3. New Member Check-In
    New Canadian member with a 2008 M40A1. I should have known when it was on sale that there was a catch. Looks like the gun store had kept it in the back room for some time. I like everything about the gun, except the trigger. Having chosen a Steyr after reading several reviews that praised...
  4. Steyr Airguns
    Hello, I am looking for information on how to adjust the trigger on my H5A. I don't have a manual in English, so I would start there if I can find one. Any help or suggestions will be appreciated.
  5. Maintenance / Tweaks / Technical Difficulties / So
    Wanted to thank all the Tutorials posted is the download section for the M40. In particular the M&S Series Trigger Tune UP and Sear Mechanism Disassembly and Reassembly. In just following the polishing tips for the firing pin spring guide (#44), trigger bar(#16), firing pin (#43), and firing pin...
  6. M, C, L and S Series
    I'm looking for a resource to help me with reassembly on my trigger group. I'd like to take it all the way down to the trigger group frame and polish the sides of the sear and drop safety lever with some 1500 grit. I have downloaded and studied all the BT guides and videos he offers on this...
  7. Other Rifles
    Hi I need the plactic trigger guard and few magazines for spare. Anyone can help me to buy for me and sent it to Indonesia ? I will pay for your time etc. Because I can't find in Indonesia. Thanks Benny
  8. Other Rifles
    Are the triggers the same for the Model M/S/L the same as the SSG 69? I picked up an older Model M '06 yesterday with the type 1 non adjustable trigger. It would be fine for bench work but at under 1.5 pounds its too light in general. Steyr said I could buy the type 2 for bukoo bucks, but I see...
  9. New Member Check-In
    I just went and got my first Steyr M40-A1 from my FFL. After doing a lot of research on this pistol I hope I am not disappointed. It will be a nice addition to my Ruger, a Canik55,and 2 Sigs.
  10. Tactics and Training
    Today I got in the mail my ASG Airsoft Steyr M9 pistol. I have been watching eBay for some time and they came back into stock. So far so good. I have open the box, fondled it a bit, and read the brief instructions. The piece is very well built, steel frame makes it heavier than a real unloaded...
  11. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  12. M, C, L and S Series
    As I mentioned elsewhere, because I've moved away from the .40 caliber, I am hoping to trade my M40s for M9s once the classified section is working again. In the meantime, I've sold off a couple of other guns, and so I decided to modernize the Steyr collection: Yesterday I picked up an M9-A1...
  13. New Member Check-In
    Hello everyone, I'm new to this forum. Just purchased recently a Steyr SSG 69 PII in 308 with two trigger set and I love it... now I just need to get used to shooting this trigger format ;)
  14. M, C, L and S Series
    Being a wimp with small hands, both the weight and the grip size of the M9A1 as well as the short reset is great for me. But what kills me is the trigger pull weight of 25N, while it breaks clean my finger just struggles to produce the amount of force. Is it even technically possible to get it...
  15. Maintenance / Tweaks / Technical Difficulties / So
    Hi all, new to the forum and new to the gun arena in general. Purchased an S40 late last year and during the most recent cleaning I noticed a small fissure in the multifunctional element. I have disassembled it using the various guides posted on the site and have "reassembled" it with what I...
  16. M, C, L and S Series
    Trellix Tactical out of Plano, TX has L9-A1's in stock. Spoke to Phil, very amiable guy. Price is definitely good to go. Just a heads up for any of you who would rather deal with a human than Gunbroker. :salute:
  17. Marketplace
    I have a brand new Steyr AUG A3 stock, trigger pack and 30 round magazine for sale. These have never been used as I converted to NATO version. Asking $365.00 plus shipping but open to reasonable offers. I am not posting any pics as you know what the stock, etc. looks like. You can email me...
  18. Other Handguns
    I was turned onto cz from this forum and ended up buying a canik shark-c from buds in od green. I heard they are better quality than some of the cz's. Anyhow I am pleased with it and have already upgraded the springs on it trying to improve the double and single action trigger pull. Which...
  19. M, C, L and S Series
    So when did Steyr come out with the new trigger that has the roll pin? I'm looking at a 2011 M9-A1 but I would like to get a gun that has the new improved trigger.
  20. M, C, L and S Series
    Hello Steyr Fans, I went to the range for the first time with my new to me Steyr M9 (not A1) that came with two ten round mags. I shot some other handguns, namely Sig P226, Beretta PX4, and XD9. I purchased the M9 after reading so many good things about the accuracy of the 9mm version of this...
1-20 of 500 Results