Steyr Club Forums banner
size
1-20 of 210 Results
Advanced
  1. M, C, L and S Series
    I was curious about the fact that Steyr pistols weigh more than similar polymer pistols, so I did some research on dimensions and weight of popular midsized pistols. Most of the true midsized pistols have a 15 round capacity. I also included S&W and FN fullsize pistols because these companies...
  2. New Member Check-In
    Hey y'all! I bumped into a Steyr S9-A1 at a gun show and started investigating because it just felt so danged good in my hand. Eventually I made up my mind I wanted a C9-A1 because of the hi-cap mags. I called SAI, distributors, dealers that had Steyrs in old listings. None. Zip. Nada Finally...
  3. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  4. M, C, L and S Series
    As I mentioned elsewhere, because I've moved away from the .40 caliber, I am hoping to trade my M40s for M9s once the classified section is working again. In the meantime, I've sold off a couple of other guns, and so I decided to modernize the Steyr collection: Yesterday I picked up an M9-A1...
  5. M, C, L and S Series
    M40 A1: What can it do, what can go with it ? What I do know is that: Current M40 can be converted to 357 sig with a barrel change M40 and M357 mags are interchangable if not the same IGB and Steyr sell conversion barrels There are stocks available but no 16" barrels BT and and an Israeli...
  6. M, C, L and S Series
    Being a wimp with small hands, both the weight and the grip size of the M9A1 as well as the short reset is great for me. But what kills me is the trigger pull weight of 25N, while it breaks clean my finger just struggles to produce the amount of force. Is it even technically possible to get it...
  7. M, C, L and S Series
    Here's the set-up. Steyr M357-A1, excellent condition. Functions 100% in every way - but one. Georgia Arms Canned Heat factory reloaded .357 SIG FMJ ammo. When fired, somewhere through a magazine, the gun will begin producing light primer strikes to the point it will not fire. Gun field...
  8. M, C, L and S Series
    Hey y'all! In a few weeks I will be getting my Armed Guard License in Tennessee so I can pick up some extra dough on the weekends during events needing extra security from time to time. I already have a universal drop-leg holster (which is amazing i might add), but am looking for a preferred...
  9. M, C, L and S Series
    Steyr could use a little more exposure. If someone with a few Steyrs could send them to Hickock45 he could shoot them and thousand and thousands of people would see them in action. If I worked at Steyr Arms I'd send him a few examples to evaluate. What do you think?
  10. AUG, MSAR
    Hey guys, just got in my Steyr AUG A1, with 5 original clips and 4 new 42 round clips, Im trying to load in the .223 ammo i have here at the house and it does not seam to want to stay in any of the mags, the first round will hold the second and so on just pop out when you move your hand off.. I...
  11. Other Rifles
    I am thinking of getting a precision rifle in 308Win. I looked through SSG69, SSG04, CZ750, TRG22, FN A3G, and even Blazer Tac2. I found that CZ750 and SSG04 are probably best choices for me. But I heard that SSG04 stock is not good. Some guys even reported cracked stock. I know that McMillan...
  12. Holsters
    With no luck finding anything online for my M9 A1 I went to a local gun shop and tried about 20 different holsters. No Fobus would fit, tried a few Galco's, nothing, tried the Tagua's and finally found one!! :) It's leather, paddle holster for a Springfield XDM 5", p/n PD2-670!! A little snug...
  13. M, C, L and S Series
    Hey guys, I've been shopping Viridian's offerings lately and I'd like a laser/light set-up but I've got a couple of questions. Which one for an M-A1? C5L? I Found a lightly used "universal" X5L locally, would that work? What's the difference between the standard C5L and Zombie edition? (Just...
  14. M, C, L and S Series
    Hello, this is my first post. The other day I was able to do a bit of horse trading and walked away with a Steyr M40A1 with three mags and a box of hollowpoints. I've only got serious time behind Glock 9mms (my first pistols, and what I carry currently), but I knew of Steyrs, had heard good...
  15. M, C, L and S Series
    Does anyone know what accessories for a Glock can fit nicely on the Steyr M series?
  16. M, C, L and S Series
    Gentlefolk, I recently got an M40 which I love. Gunbroker has a C9-A1 which looks interesting, if pricey at $475 for openers. I have not played with the C series...the M40 fits me perfectly. I am wondering about the C and if it may be too small. Steyrs are not common in my area, so I am...
  17. M, C, L and S Series
    Please Check this video of replacing the Steyr S9-A1 Model Frame to a C9-A1 Frame. Youtube link: http://youtu.be/56bEZ1IiFJQ
  18. Ammunition and Reloading
    The Experiment. It is an impressive experiment, to be sure. There are hotlinks on the left of the page to take you to the different parts of the experiment. If you're lazy and just want the short answer, brass is typically more reliable and easier on your barrel but if you shoot exclusively...
  19. M, C, L and S Series
    Gentlefolk; This is probably in a stickie somewhere, but it wasn't obvious to me. I have the M40, but see there are S, C and L variants also. What are these like? Thx!
  20. Other Handguns
    Gentlefolk, Back around 1981 or so I fell in love with the Steyr GB...a MAjOR purchase for a grad student. fixed chrome barrel, blowback design, super-accurate for me, massive mag capacity for the time, in the running to be the U.S military sidearm, then got politicked out by Italy and...
1-20 of 210 Results
Top