Search Results for ‘screw’

Hi all, just checked-in and happy to be here in good company. Almost two decades ago I fell in love with an SSG PIV, but it was short-lived, because a few years later I cheated on her for an AUG A2, whom I am going to fail for an SSG 08. Do you think I can be trusted?

Like the title of the thread says, I've got a blind date with a March 2013 production Steyr M40-A1. I have never even so much as held one, but that didn't keep me from ordering one today. I'm super excited and I'm anxious to get to know this pistol. One area that I seek knowledge in is...

Hello I have an older SSG in which the rear sight has come off. The post looks like it has been soldered on, making me think it was broken before. Is the post threaded into the barrel? What screw thread? Any help will be appreciated to put things right again. Thanks, Don

About a week ago I purchased my first pistol. I was approved almost immeadiatly. I found a dealer that had the S9 and was so excited I tried to buy it. I was called by the store to let me know that I was denied. Has this ever happend to anyone else? What could cause this?

So I have fallen in love with my Ma1 40... but would like to branch out. I just got to hold a cz duty p 07 for the first time. I liked it. I now kind of have an itch to get one... the price was $450 after a mail n rebate to gander mountain. However I like the steyr so now I am interested in...

Hello all, Could anyone point me in the direction or know where I can find the 2 hex head screws that hold the magazine adaptor onto the stock of the Steyr Scout. In the act of moving from one residence to another, it appears I have misplaced the 2 screws an will need a new pair for the 10...

Hey all, I just bought a beautiful condition used M9-A1 with custom kydex holster and mag carrier. I ran the date code (POF), and it appears to have been built in 2004. The serial is 045xxx. I assume, then, that it must have the "old style" extractor. Correct? Incorrect? In any...

Hi folks. My M9-A1 was supposed to arrive yesterday but useless Canada Post dropped the ball. Hopefully it arrives Monday instead of being lost forever to limbo. Stressful. Anyway... I'm a relative newb and have never disassembled or cleaned a firearm before, short of using a bore snake in my...

Hi. Steyr Club newbie here. I am trying to figure out how to sight in my 1995 Steyr SSG PIIK. It came with a Hensoldt Wetzlar ZF 500 scope, which is a scope that I think is fairly commonly seen on these types of Steyrs. Currently, the rifle shoots about 8 inches high at 100 yards (i.e...

I've searched the forums and found instances of members using Viridian and Laserlyte lasers on S40s, but Iv'e spent the week going store to store and mounted lasers on my new S40, and they just don't seem to work. To be honest, I haven't tried a Viridian, as I'm trying to keep it small and...

Hi all, My first post and all. I wasn't even aware of this pistol until about a week ago. I saw one at a gunshow and I think I've found the perfect 9mm pistol. It looks and feels unlike any other semi auto. Questions - Are the M9-A1 and C9-A1 the exact same frame? I was able to handle both and...

So, I will be getting an M9-A1 in the next couple of weeks, and looking at pricing, I see two places come up. CTD has the new hotness with the roll pin trigger and a single 17 round mag for $467 shipped. Dans Ammo has the slightly older LCI model with 2 15 round mags for $399 shipped to my...

OVER SHADOWED: REVIEW & RANGE REPORT – CZ 75 SP-01 Shadow Česká Zbrojovka claims that the CZ-75 (and variants) are in service with "more Governments, Militaries, Police and Security agencies than any other pistol in the world." The CZ-75 has a mystique all its own. The late Jeff Cooper loved...

Has anyone removed their factory SSG 08 muzzle brake to install a suppressor?

Hi, I have above model and referred to this forum , saying this rifle is really not a schonauer and is reallistically a Steyr. This rifle has a factory fitted claw mount,and my original scope is now out of action, cant figure out how to remove the rear clow base. Please can anyone help advice...

:D Bought a highnoon holster last week. I got the Split Decision model and recieved it the next day. They are in Florida, so am I. The Holster is excellent. When they say that their clip will hold on to the belt they meen it. In fact, I had to take the belt off the pants to get the holster...

don't know how many folks caught this it seems to me that mr IDPA steyr has solved the extractor problem in "90.000 Rounds of Maintenance and Repair" he writes; "The design problems are different and not easily remedied. I have tried multiple fixes from re-shaping the extractor hook to...

How do I adjust the trigger pull on my new Pro Hunter. The manual is silent on how to do it!

Greetings, I had FTE problems with my M9, so Steyr Mannlicher in Austria sent me the new kit. It had a slightly longer spring and a beveled extractor plus claw that was I believe identical to what was initially installed in the gun that I purchased from CDNN. It went fine for two range...