Steyr Club Forums banner
pull
1-19 of 207 Results
Advanced
  1. Maintenance / Tweaks / Technical Difficulties / So
    I also noticed that the strike was more off center then I would have imagined. Other than that the pistol has fired flawlessly. NOT that I believe it did but COULD the BT striker cups have aided or caused the light primer strike?
  2. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  3. New Member Check-In
    Being Naive to protocol and net manners, I joined up a while back and asked for advice and got some great replies. I just purchased and M40 A1 pistol, my very first new, new gun. I am trying to figure out how many calibres I can mount on this frame, .Who needs accessories if I can do what I...
  4. M, C, L and S Series
    Being a wimp with small hands, both the weight and the grip size of the M9A1 as well as the short reset is great for me. But what kills me is the trigger pull weight of 25N, while it breaks clean my finger just struggles to produce the amount of force. Is it even technically possible to get it...
  5. Maintenance / Tweaks / Technical Difficulties / So
    Hi all, new to the forum and new to the gun arena in general. Purchased an S40 late last year and during the most recent cleaning I noticed a small fissure in the multifunctional element. I have disassembled it using the various guides posted on the site and have "reassembled" it with what I...
  6. Other Handguns
    I was turned onto cz from this forum and ended up buying a canik shark-c from buds in od green. I heard they are better quality than some of the cz's. Anyhow I am pleased with it and have already upgraded the springs on it trying to improve the double and single action trigger pull. Which...
  7. Maintenance / Tweaks / Technical Difficulties / So
    Got one of the original M357-A1's. Love the gun. Problem: With the gun completely assembled, including a mag, and uncocked, the slide can be pulled back about 1/2" then it locks. A SLIGHT pull on the trigger gives a audible "click" and the slide releases and functions normally. What's going...
  8. Maintenance / Tweaks / Technical Difficulties / So
    Happy Memorial Day! I'm having a dis-assembly problem with my M40 handgun while trying to remove the sub frame from the polymer grip. I can't get the manual safety engagement pin to come out. I've followed the online sub frame removal tutorial to the letter I believe and still can't get it to...
  9. Other Handguns
    Today I was able to take my Taurus TCP out for a spin, and I must say she handles like a dream. Between me, my wife, and a friend of mine, the little TCP shot 80 rounds of cheap Russian ammo ($8 for a box of 50), and 50 American Eagle (or some such) flawlessly! I had no failures to feed or to...
  10. M, C, L and S Series
    Does this seem normal to you guys? This is a loaded gun with only a slight amount of pressure put on the front of the slide. It will hold back and stay held back. This gun was mfg. November of 2012. The trigger is also 7lb 11oz average by my lyman digital scale. What's up with this thing?
  11. M, C, L and S Series
    Recently purchased a Steyr M9A1 new, have put around 200 rounds through it so far so I am not sure if this could be a break in issue. What is happening is when I have an empty magazine in my M9 and have the slide locked back, if press the slide release it will only move forward slightly and...
  12. M, C, L and S Series
    Greetings, Purchased a M40-A1 last February, and finally made it to the range yesterday. Was a bit hesitant on purchasing this pistol because of problems fully explored on this forum. Happy, and relieved to report that the pistol functioned perfectly. Only had time to fire about 50 rounds (I...
  13. Other Handguns
    hello.i em new here.i dont know wen my post is right here.i will know all the bad and all the good words for crvena zastava m57 also know als tokarov t-33 but only diference with 9 bullet.the yougoslavian version of course.the original tt-33 has just 8 rounds.so please tell me all that you know...
  14. M, C, L and S Series
    Installing the 2 part Delrin bushing, I slightly folded one of halves. I got the bushing half straightened back out and then intalled it on the striker. The gun seems to be working fine. Is this going to be ok?
  15. New Member Check-In
    I recently came across an S9 on Armslist. I traded up for it, and all I can say is wow! I have never owned a polymer wonder, but have handled many different kinds and the Steyr feels marvelous! The ergonomics are great and the trapezoidal sight picture makes me wonder why 3 dots are the norm in...
  16. New Member Check-In
    Just wanted to say hi to everyone and show off my new AUG I just got. I really love this rifle, can't wait to start adding the optics and accessories.
  17. M, C, L and S Series
    Hello All, I ordered a few M9 17 round magazines from R&R Arms out in MN back in Jan. For various reasons I only got my hands this week. Three were simply wrapped in a plastic with their barcode label on the tight plastic. The other two were wrapped in the same tight plastic, but they were...
  18. M, C, L and S Series
    I have a M40-A1, I've put maybe a couple hundred rounds through it. I've only ever done the basic field strip as shown in the owner's manual. Right now I'm deployed to Afghanistan and they wouldn't let me take any of my own, nice guns. I have to make do with a beat up M16. But, when I get...
  19. M, C, L and S Series
    So I have been a fan of Steyr for the last few months even though i didn't actually have one in my hand to really be part of the club. Well I finally got my Ma1 40 last night. First impression... AWESOME! Best feeling gun I own!!! I absolutely freaking LOVE it! I loved the Trap sights too...
1-19 of 207 Results
Top