Search Results for ‘pin’

Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...

Here's the set-up. Steyr M357-A1, excellent condition. Functions 100% in every way - but one. Georgia Arms Canned Heat factory reloaded .357 SIG FMJ ammo. When fired, somewhere through a magazine, the gun will begin producing light primer strikes to the point it will not fire. Gun field...

Does anyone have any idea how to remove the Parker Hale bipod spigot from an SSG-08? The original Parker Hale is way too heavy and unstable. The Versapod knock offs are cheaply made. It seems like it should be removable with tools. I would rather do that, than hacking off the spigot. Any help...

i ordered it on the 2nd....lgs received it on the 3rd. the gun and 2 mags and 2 keys, but no paperwork or manuals, and some strange locks...more below in pics.... loaded chamber indicator, gun has a snap cap in it to show it being chambered... now with chamber empty.... here is an...

I haven't seen this reported before; the Firing Pin Spring Guide broke by fatigue in a rather light used M9-A1 (around 600-800 shots. See it here: Here you can see two additional fractures that can breake in any moment ... I'm perplexed by this problem ... any ideas about the cause...

So when did Steyr come out with the new trigger that has the roll pin? I'm looking at a 2011 M9-A1 but I would like to get a gun that has the new improved trigger.

I recently acquired a new S9-A1 which was manufactured in 09/2012. The firing pin spring was coated with some sort of red lubricant paste. Does anyone know exactly what it is? FWIW, I put it's first 200 rounds (Federal 115 grain FMJ RN) through it last week. With the exception of shooting a bit...

It has been a while since I last posted and thought I would share my fantastic experience with my new M9-A1. I sold my old M9 to a friend of mine and used the money to finally get the new M9-A1 in March. I purchased it from Trellix Tactical and must say it was a pleasure doing business with...

Happy Memorial Day! I'm having a dis-assembly problem with my M40 handgun while trying to remove the sub frame from the polymer grip. I can't get the manual safety engagement pin to come out. I've followed the online sub frame removal tutorial to the letter I believe and still can't get it to...

I just finished up doing a little work on my M9-A1, trying to deal with the slide clicking, out of battery issue, and found something interesting. I also have issue with rapping, not slamming, or hitting hard, the mag base plate when the pistol is cocked, and the slide backs out of battery. I...

Howdy all, I am looking for a firing pin assembly (single parts are welcome anyway) for my SSG PIV rifle. Can anybody help find it? Any info is much appreciated. Thanks much

Hey there, I am new to handguns in general, and just purchased a Steyr M40-A1. I love the way this gun feels and shoots, but noticed primer swipes that have me a little concerned. From researching it seems others have primer swipe marks with this gun as well, but when the swipe extends all the...

I have a 1912 without firing pin or spring. Otherwise in good condition. I keep getting sent to the same sources and they are sold out. Any ideas or contacts would be great. If I can get hold of one or a good blueprint, I can have one made. Thanks

Recently purchased a Steyr M9A1 new, have put around 200 rounds through it so far so I am not sure if this could be a break in issue. What is happening is when I have an empty magazine in my M9 and have the slide locked back, if press the slide release it will only move forward slightly and...

Does anyone know what accessories for a Glock can fit nicely on the Steyr M series?

Hello all, I have recently picked up a new (well new to me) Pro Hunter in 376 Steyr. I have a couple questions if anyone can help me out. First, I've ordered the updated bolt cam and sent it to John on here to switch out and polish. I'm also having him do the bolt knob conversion to the...

Hi! Today at the end of my training M9-A1 refused to reset. After I came home, I noticed that catch (nr 10 on parts diagram) would not come up to catch the firing pin. When I fully disassembled the frame, I have noticed that one of the tails of catch spring (part number 12) was broken. In total...

after 2 sessions full of extraction problems i finally got a replacement extractor from steyr. i did not get a new spring set up. put the new extractor in and today had zero problems with 200 rounds fired. i was getting pretty frustrated. im a happy guy now and my steyr is working great and...

Hey guys, just signed up after owning an s9 for a while now. Been shooting it and have had MANY FTE's, stovepipes and FTF's. I thought it was just a matter of time and breakin period. Today I went to the range and shot out of 1 of the original 10 rounders and used (3) 17 rounders, two of which...

I am going to be putting my GB on Gunbroker. My hands are just a little bit too small for it, but it is a sweet gun. No box, but I have three mags. In the meantime, I have a few spare parts: Qty: 1 Firing Pin Qty: 1 Firing Pin Return Spring Qty: 1 Decocker Spring Qty: 1 Trigger Spring...