Steyr Club Forums banner
pictures
1-18 of 153 Results
Advanced
  1. New Member Check-In
    Hi Steyrclub... I am new to this forum and this is my first post. I own a Steyr AUG A3 BullPup which I recently purchased and have not had an opportunity to shoot it yet... however, I am really look forward to the day as it is ready to go and I am very proud of it. Looking forward to sharing...
  2. M, C, L and S Series
    I recently came across these pictures of an m9-a1 with what looks to be a reversible mag catch. I know this is available on the new L9 pistols, but was unaware of them on the m9. I don't really need this feature(being right handed), but the larger catch is nice). Anyone ever seen this before?
  3. M, C, L and S Series
    I just picked up my first Steyr pistol from Cabela's in Owatonna, Minnesota - an M9-A1. I actually traded my Sig P229 .40 S&W for the M9. Date code is LWR - Feb 2013, so fairly new production. I came across the Steyr after researching the Caracal and learned that they were designed by the same...
  4. M, C, L and S Series
    Hi there, as the title says, the edge of the feed ramp of my M9A1 (Frankensteyr) just broke (it's a small piece) but the gun is only 4,000 rounds give or take a few hundred. And living where I do, it's nearly impossible to get a new barrel. Also the paperwork for getting a new barrel is hell...
  5. Maintenance / Tweaks / Technical Difficulties / So
    Got one of the original M357-A1's. Love the gun. Problem: With the gun completely assembled, including a mag, and uncocked, the slide can be pulled back about 1/2" then it locks. A SLIGHT pull on the trigger gives a audible "click" and the slide releases and functions normally. What's going...
  6. Maintenance / Tweaks / Technical Difficulties / So
    G,day all, I recently recieved my new M40A1. The manufacture date is LOD. So I contacted Steyr Austria about a possible Extractor upgrade and they in turn sent me one via North Sylva here in Toronto. It arrived free of charge in a very timely manner. I just have one question and I apologize if...
  7. Holsters
    Finally got my Eclipse holster for my M9-A1 yesterday. I was initially disappointed with it, I thought I wanted to wear it at 3:00. That's where I would wear my nylon holster. The body side of it kinda poked into my hip meat, and the loop position made my belt stick out. (my waist is 32-34-ish)...
  8. M, C, L and S Series
    Greetings from Sunny South Africa. Does anyone out there know if the ST-01 Trijicon sights will fit my S9. We recently had a Hunting show here and Trijicon had a stand. They however were at odds to tell me if the ST-01 would fit the S9. I suppose the question is are all the sight slots the same...
  9. Other Handguns
    Picked up an ffl transfer of a zastava m57, new production version.....while doing my 4473 form I look down and see a fnh fns. This pistol had never caught my eye befire. So I ask the gunstore counter man if I can see it. Played with it and I got to say it is one seriously overlooked pistol...
  10. New Member Check-In
    Hi All I found the site whilst looking up information on the .308 Scout, enjoyed what I read and thought joining and hopefully contributing would be a good idea. I have owned a Scout in 5.56mm, a superb fox rifle, I have owned an SSG P2 in .243 for 4 years and had the barrel shortend to 17...
  11. M, C, L and S Series
    So last night, I went on a board and someone showed how to modify Browning High Power magazines to be used in the M9/S9 and was wondering if the same would be possible for the M40/S40. I'd seen a thread talking about M&P magazines being a possibility or XD as well. Has anyone done this? 12...
  12. Other Handguns
    Okay, so in the thread below, I have chronicled my S&W PPK. Now on to the other PPK (I have two). Will try to make a long story short. Got it at a pawnshop as it was advertised as a Pre-War. I memorized the serial number, went home and confirmed it was made in 1935. No problems there. Only...
  13. M, C, L and S Series
    Got mine in yesterday. It comes attached to this little fake glock thing that's actually a box for the attachment hardware and battery. I think it's cute. Might turn it into a breath mint box or something. Aww yeah. Motherf***** is bright! It's hard to even look at the laser dot.
  14. M, C, L and S Series
    So, I tried to cook today. This, as usual, filled the house with a fine haze of smoke, which isn't a good sign for my culinary skills, bit does make for awesome photo-ops with my Steyr C9A1 with Viridian, since the laser is very clearly visible. I just hope the downstairs neighbors don't call...
  15. M, C, L and S Series
    Newby here, have a little bit of an issue. Cleaning my new M9, disassemble the extractor following the tutorial. When trying to put it back, it won't go in properly. The head where the spring attach to is rounded as compare to the flat/bevel from the tutorial. So every time, it is closed...
  16. M, C, L and S Series
    If it shoots as good as it looks and feels then it is a match made in heaven. The ONLY complaint (not really a complaint) I have is that I wish the sights were more visible in lower light, however I can definitely see how the fast target acquisition will be utilized with the trapezoidal sights...
  17. M, C, L and S Series
    I apologize if this is a repetitive post, I just could not find what I was looking for. I recently purchased a M9-A1. I had several failure to ejects with the first 100 rounds I shot at the range. I talk to Steyr and Jeff sent me new extractor and pin. My question is, does anyone have...
  18. M, C, L and S Series
    Hey guys, i've never owned a pistol. basically, just as a background, i wanted to get into pistols, but i had a unique problem. i have smaller hands. so, on many full size models, its very difficult for me to reach the magazine releases. This especially annoys me, because here in Hawaii, we...
1-18 of 153 Results
Top