Search Results for ‘parts’

Does anyone know where I can get a hold of a decocking lever for Steyr GB without buying a whole pistol? I managed to pick up one with a spur hammer but a damaged lever for under $500 so I'm hoping to make it whole again. Any help is appreciated Gents.

I am looking for a floorplate for my Styer GB mag. Long story short popped off in the field and couldn't find it. Don't feel like paying an absurd amount for a new mag so was hoping to find someone willing to sell a replacement or knew of an alternative that would fit. Not really a collector so...

Are the triggers the same for the Model M/S/L the same as the SSG 69? I picked up an older Model M '06 yesterday with the type 1 non adjustable trigger. It would be fine for bench work but at under 1.5 pounds its too light in general. Steyr said I could buy the type 2 for bukoo bucks, but I see...

I searched "drop free" in this forum but came up craps. Any suggestions on making these mags drop free like my glocks? I had some serious trouble yesterday at our local IDPA match. Had to "rip" the mag out every damm time.

Hi, folks. I've been a long-time owner of the Steyr M -- I have two M40s that I got right after they came out. But over the years I have moved away from the .40 and now in autos I shoot mainly 9mm and .45. I've sold off most of my .40s but it has occurred to me that since I really like the...

Hi all, new to the forum and new to the gun arena in general. Purchased an S40 late last year and during the most recent cleaning I noticed a small fissure in the multifunctional element. I have disassembled it using the various guides posted on the site and have "reassembled" it with what I...

Had my choice between a "very new" M9-A1 (3 10 round mags w/box), and a used M40-A1. Picked the .40, SMI import, s/n 04708x. 2 12 round mags, no box. What do I need to know? Right choice? Thanks in advance! Gary Semper Fi Semper Fi - Sent from my iPad using Tapatalk

I haven't seen this reported before; the Firing Pin Spring Guide broke by fatigue in a rather light used M9-A1 (around 600-800 shots. See it here: Here you can see two additional fractures that can breake in any moment ... I'm perplexed by this problem ... any ideas about the cause...

I have a nonworking GB that is in otherwise good condition. It has bad hammer springs that were causing light primer strikes. My gunsmith has pulled the springs out, and tried to find then make some, but had no luck. I do have the original springs that came out of it, but they are not installed...

Greetings from smokey Colorado. After trying out a friends Steyr, I found and purchased a used M9-A1 at the gun show this past January as my first ever handgun. I love the gun, but I have had numerous extraction failures. It seemed to be mostly linked to the remanufactured bulk ammo I had...

Hello All, Checking in from Bucks County, Pa. Just picked up a new, M9..can't wait to get to Wicen's Shooting Range. I've been overwhelmed by the conflicting information regarding the pro's and con's of this firearm. So, what's the bottom line? What should I look for first if issues arise...

G,day all, I recently recieved my new M40A1. The manufacture date is LOD. So I contacted Steyr Austria about a possible Extractor upgrade and they in turn sent me one via North Sylva here in Toronto. It arrived free of charge in a very timely manner. I just have one question and I apologize if...

Howdy all, I am looking for a firing pin assembly (single parts are welcome anyway) for my SSG PIV rifle. Can anybody help find it? Any info is much appreciated. Thanks much

Like the title of the thread says, I've got a blind date with a March 2013 production Steyr M40-A1. I have never even so much as held one, but that didn't keep me from ordering one today. I'm super excited and I'm anxious to get to know this pistol. One area that I seek knowledge in is...

Does anyone know what accessories for a Glock can fit nicely on the Steyr M series?

Picked up an ffl transfer of a zastava m57, new production version.....while doing my 4473 form I look down and see a fnh fns. This pistol had never caught my eye befire. So I ask the gunstore counter man if I can see it. Played with it and I got to say it is one seriously overlooked pistol...

Hi! Today at the end of my training M9-A1 refused to reset. After I came home, I noticed that catch (nr 10 on parts diagram) would not come up to catch the firing pin. When I fully disassembled the frame, I have noticed that one of the tails of catch spring (part number 12) was broken. In total...

Attended a pistol class 4-6-13. The class was given by 914 Consulting at C2Shootng and it was a Vickers Shooting Method class. The class was great, the Steyr not so much. It started off fine, you know the drill. You are the only guy that shows up with "the other Austrian Pistol". Had a custom...

Mr. Bubits, I much appreciate your participation here! I wonder what you think of the new-ish Boberg pistols? Yes, they seem complicated, with many finely machined parts which drive the price up. But the design refinement seems so brilliant to me, and the jewelry-like beauty of the piece, all...

Okay I have looked through the form and couldn't find any info, I just added a S40-A1 to my family. the first thing that I noticed was the Mag release is so hard I have to rotate the gun in my hand to get it in a position to create enough presser to release it. is there anyway to lighten the...