Steyr Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 500 Results
  1. Maintenance / Tweaks / Technical Difficulties / So
    I also noticed that the strike was more off center then I would have imagined. Other than that the pistol has fired flawlessly. NOT that I believe it did but COULD the BT striker cups have aided or caused the light primer strike?
  2. Other Rifles
    Are the triggers the same for the Model M/S/L the same as the SSG 69? I picked up an older Model M '06 yesterday with the type 1 non adjustable trigger. It would be fine for bench work but at under 1.5 pounds its too light in general. Steyr said I could buy the type 2 for bukoo bucks, but I see...
  3. Holsters
    I think it came out alright, I just need to refine the edges a little but it fits nice. I do have a question though, I need spacers to put between the belt clip and the actual holster itself, I though stacking vinyl washers or kydex strips would look ultra tacky so I am curious what yall use for...
  4. Holsters and Cases for Sale
    This is the 3rd holster I have made and after I set all of my rivets I realized that I put them in backwards for right handed draw SOOOOO, I decided to make it for a lefty. ALL holsters I make and sell for full price will come with 1 free mag carrier. I am asking $40 TYD, the clips accommodate...
  5. Holsters
    MODS, if this is against the rules please remove I would like it to go to someone that NEEDS 1 and that wont just turn around and sell it so they could make a few extra bucks. This was my 2nd attempt at making a holster and it came out great until I screwed up at the very end where the belt...
  6. Ask Bubits
    how come u made the magazine opening small? why not make it friendlier to a quick reload? i woul like to see a add on magwell and longer magazines.
  7. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  8. Holsters
    Hey all- First of all, no paid advertisement here...just wanted to give an update regarding a custom leather holster company that I've been eyeing for a while called Winthrop Holsters http://www.winthropholsterstore.com/servlet/StoreFront. They're in Lakewood, Ohio (north side of Cleveland area...
  9. M, C, L and S Series
    Trellix Tactical out of Plano, TX has L9-A1's in stock. Spoke to Phil, very amiable guy. Price is definitely good to go. Just a heads up for any of you who would rather deal with a human than Gunbroker. :salute:
  10. M, C, L and S Series
    Hey y'all! In a few weeks I will be getting my Armed Guard License in Tennessee so I can pick up some extra dough on the weekends during events needing extra security from time to time. I already have a universal drop-leg holster (which is amazing i might add), but am looking for a preferred...
  11. Other Handguns
    I have a nonworking GB that is in otherwise good condition. It has bad hammer springs that were causing light primer strikes. My gunsmith has pulled the springs out, and tried to find then make some, but had no luck. I do have the original springs that came out of it, but they are not installed...
  12. Holsters
    I have a custom holster maker in Fayetteville who is working with me to come up with some designs for the Steyr....I'll keep ya'll posted on how they come out. I'm open to designs if anyone wants to submit. I'll take pics as they come out.
  13. Ammunition and Reloading
    I have a bunch or Oregon trail cast bullets anyone have load they use with casts bullets? I have plenty of 231 on hand. Let me know your loads! Thanks
  14. Other Handguns
    I was turned onto cz from this forum and ended up buying a canik shark-c from buds in od green. I heard they are better quality than some of the cz's. Anyhow I am pleased with it and have already upgraded the springs on it trying to improve the double and single action trigger pull. Which...
  15. M, C, L and S Series
    Hello Steyr Fans, I went to the range for the first time with my new to me Steyr M9 (not A1) that came with two ten round mags. I shot some other handguns, namely Sig P226, Beretta PX4, and XD9. I purchased the M9 after reading so many good things about the accuracy of the 9mm version of this...
1-15 of 500 Results
Top