Steyr Club Forums banner
issues
1-20 of 285 Results
Advanced
  1. Maintenance / Tweaks / Technical Difficulties / So
    I also noticed that the strike was more off center then I would have imagined. Other than that the pistol has fired flawlessly. NOT that I believe it did but COULD the BT striker cups have aided or caused the light primer strike?
  2. M, C, L and S Series
    Hello all!! I am a new proud owner of s Steyer S40 A1 and I have to say that I am very impressed with the gun. I took possession of it this past wed and took it to the range today. Put 200 rounds of that white box winchester 100 rnd box without ANY issues at all. It is the most accurate gun I've...
  3. M, C, L and S Series
    ive been wearing my M and MA1's here in florida for years. For the first time i noticed that the sweat had gotten into my mag release and caused issues with rust and malfunctions of the release. I am left side carry, so the right side of the pistol was against my body. In particular it was the...
  4. New Member Check-In
    Hi, I just picked up my new M9-A1 today. Can't wait to get to the range.
  5. M, C, L and S Series
    Hey folks, I am selling a M9-A1 purchased in April this year. 150 rounds through it. No Issues. AWK stamped. I have 4 17rd mags with it. Transfer location is TX. If someone is interested, let me know via private messages or here. Thanks a bunch.
  6. Forum Issues
    We have taken the Classifieds down due to some possible legal issues. I will keep the club up to date as to the outcome of this. I apologize to all members that have items listed. Our account has been temporarily disabled until a solution has been found to bring it online again. If no resolution...
  7. Maintenance / Tweaks / Technical Difficulties / So
    Hi all, new to the forum and new to the gun arena in general. Purchased an S40 late last year and during the most recent cleaning I noticed a small fissure in the multifunctional element. I have disassembled it using the various guides posted on the site and have "reassembled" it with what I...
  8. M, C, L and S Series
    I thought about picking up an M9-A1 a few years ago, but held off because of the problems I was reading about. Mostly FTF and ejection issues. I haven't read about any problems in a while. Are the new manufacture M9-A1s good to go?
  9. M, C, L and S Series
    I have a quick question.. I recently bought a 2011 M9-A1 to replace my M40-A1 (not a fan of the recoil of the m40-a1). When I was cleaning it for the first time (I always clean and oil a gun before I shoot it for the first time) I noticed that when I took out the extractor and the extractor...
  10. M, C, L and S Series
    Hello Steyr Fans, I went to the range for the first time with my new to me Steyr M9 (not A1) that came with two ten round mags. I shot some other handguns, namely Sig P226, Beretta PX4, and XD9. I purchased the M9 after reading so many good things about the accuracy of the 9mm version of this...
  11. M, C, L and S Series
    Hi there, My eldest daughter loves my M40-A1 but does not like the recoil. So this weekend she bought an 2004 M9 at the local gun show. We took it home and I showed her how to clean and lube it. We fired it at the range today. She loves it, but with all three mags. the slide would not lock open...
  12. AUG, MSAR
    I have found a former MSAR dealer who no longer has rifles in stock and doesn't plan to get any more but has what he terms "a bunch" of MSAR magazines. I asked him if he would be willing to sell me the mags at a discount (he has them marked at $39 for 30-rounders and $45 for 42-rounders). He...
  13. New Member Check-In
    Hello All, Checking in from Bucks County, Pa. Just picked up a new, M9..can't wait to get to Wicen's Shooting Range. I've been overwhelmed by the conflicting information regarding the pro's and con's of this firearm. So, what's the bottom line? What should I look for first if issues arise...
  14. M, C, L and S Series
    It's a little premature for me to panic, but I think I might have just bought a Frankensteyr despite my best efforts. I did not even think that the advertisement said M9 instead of M9A1. The other thing that should have tipped me off is that the NIB gun shipped with 15 rounders instead of 17...
  15. AUG, MSAR
    Hey guys, just got in my Steyr AUG A1, with 5 original clips and 4 new 42 round clips, Im trying to load in the .223 ammo i have here at the house and it does not seam to want to stay in any of the mags, the first round will hold the second and so on just pop out when you move your hand off.. I...
  16. Maintenance / Tweaks / Technical Difficulties / So
    I just finished up doing a little work on my M9-A1, trying to deal with the slide clicking, out of battery issue, and found something interesting. I also have issue with rapping, not slamming, or hitting hard, the mag base plate when the pistol is cocked, and the slide backs out of battery. I...
  17. New Member Check-In
    Hello, I've been reading over the threads on the forum for a few months, looking for information, and decided it's time to register. I acquired an M40-A1 last October, and it has become my favorite polymer frame pistol, beating out pretty much everybody else's offerings. and I can see why it...
  18. M, C, L and S Series
    Hi all, After being shot briefly yesterday by my Pastor (who loved the gun, by the way), my S40-A1 has started to make a strange rattling noise when I tilt the gun up or down. It also feels as if something is sliding around in the slide. I immediately unloaded the gun and took it apart to...
  19. M, C, L and S Series
    Alright so I just picked up a new M9-A1 date of manufacture was March 2013 and it is an SAI import not a frakenstyer from what I can tell. I had an early s40 ages ago and loved it but sold it to pay for school I have now replaced it with this new m9-a1. I am curious as I am having dreaded...
  20. M, C, L and S Series
    Has anyone found a magazine loader for the M9? My arthritis is making it harder and harder to load them with finger power.
1-20 of 285 Results
Top