Steyr Club Forums banner

installed

  1. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  2. Other Handguns
    I have a nonworking GB that is in otherwise good condition. It has bad hammer springs that were causing light primer strikes. My gunsmith has pulled the springs out, and tried to find then make some, but had no luck. I do have the original springs that came out of it, but they are not installed...
  3. Other Rifles
    Hello all, I'm a newbie to the club, and I did a forum search on this issue but I had no luck there... Does anyone know where I can find a 30-60MOA slanted picatiny rail to put on top of my HS-50? I understand that the newer HS-50's have a 20MOA slanted base on them. In fact, I may be the...
  4. M, C, L and S Series
    I installed these and am very pleased. made the trigger very smooth. The Glocks have the delrin cups standard. Not sur why Bubbits made this on metal, but it just drags on the fp spring. Get tacko cups
  5. New Member Check-In
    Hello All, Checking in from Bucks County, Pa. Just picked up a new, M9..can't wait to get to Wicen's Shooting Range. I've been overwhelmed by the conflicting information regarding the pro's and con's of this firearm. So, what's the bottom line? What should I look for first if issues arise...
  6. Other Rifles
    I'm finally comitted to get a .308 scout. What is the best scope for it ? I'm considering the Burris Scout scope 2.75x7. Is this a good option ?
  7. M, C, L and S Series
    after 2 sessions full of extraction problems i finally got a replacement extractor from steyr. i did not get a new spring set up. put the new extractor in and today had zero problems with 200 rounds fired. i was getting pretty frustrated. im a happy guy now and my steyr is working great and...
  8. Maintenance / Tweaks / Technical Difficulties / So
    Hello, dear friends I am interested to know - should the disassemble lever snap into its former place automatically when I set the slide after disassembling? Ealier it snaped into its place automatically, but after I completely disassembled my Steyr M-A1 the level does not want to and I have to...
  9. M, C, L and S Series
    http://www.randomgunstuff.com/1/post/2013/02/steyr-m9-extractor-update.html http://www.randomgunstuff.com/1/post/2013/02/steyr-m9-extractor-update.html
  10. New Member Check-In
    Hi everyone, New to forum. Wanting to mount a Burris Signature Select 1.5x6 on a 308 Mountain rifle. Want to use Talley Quick detachable rings and base as I am wanting to send the rifle to Brockmans to have the pop up peep sight installed in the base as well as one of their front sights. The...
  11. Maintenance / Tweaks / Technical Difficulties / So
    Good morning all, I left a voicemail for Jeff about two and a half weeks ago as his colleague spoke to me and Jeff verbally confirmed with him to transfer me to his voicemail and leave a message about my inquiry. I was asking about getting a replacement extractor and the correct magazine...
  12. Other Handguns
    So I was awoken this afternoon (worked night shift in ED last night) by my twin brother who could not stop RAVING about the Steyr Ma1 40 S&W I made him buy. He went on for minutes and said after the very first shot he was a fan and "in love." I am still waiting for mine to show up by mid...
  13. M, C, L and S Series
    I just ordered a set of night sites for my M1 to replace the factory ones. How do I replace them? Do I move them from left to right or do I move them from right to left? I have used the search function on this forum, and have found different opinions on how to do this. I know on my Glock that I...
  14. M, C, L and S Series
    I am happy I finally acquired myself a new C9-A1 handgun the other day. Ordered it in from Dave at CompactFirearms.com along with two additional 17rd mags. Instead of the listed 3 Dot sights it came with the Trap sights installed which I was pleased to see. I am liking them. Also it has a Born...
  15. M, C, L and S Series
    I have a Steyr S40-A1 that I bought brand new. It had problems with ejection and such so I contacted customer service and had quick resolution with them sending me a new extractor. I installed the extractor and went out to shoot it and the trigger went bad. It doesn't reset. You pull on the...
  16. New Member Check-In
    I'm relatively new to pistol shooting and recently purchased a NIB M9-A1, it is one of the nicest pistols I have had the pleasure to shoot. I'm having some FTE issues and was hoping to learn from the folks with the knowledge how to resolve my issues. Glock 17 STI GP-6C 9mm S&W M&P 9mm...
  17. Other Handguns
    Hello everyone: I want to renew the rear sight of my Steyr GB, and I don't know what brand and model fits my pistol. Someone has installed in the Styer GB, sights designed for another handgun? thank you in advance.
  18. Forum Issues
    I am having problems trying to used the Classified section. When I click on the "Sell an Item" Icon it goes to the Enthusify Marketplace for Steyr Club Members. There is a "Continue" there, but when I click on Continue, it tells me "Couldn't make a connection to the marketplace. Please start...
  19. M, C, L and S Series
    My first M40 is 14 yrs old and has a trigger pin toward the bottom of the trigger. I just purchased an unfired M40 at an estate sale for $400 and the trigger pin is much higher on the trigger. The trigger pull on this newer gun feels like it might be a tad heavier but it isn't bad at all...
  20. M, C, L and S Series
    I received a package from BT's today with the striker spring and cup set. The parts installed very easily and really improved the trigger. Notable improvement in the weight and smoothness of the trigger. Also, I polished the outside of the striker itself and this helped even more. All-in-all I...
Top