Steyr Club Forums banner
fully
1-20 of 107 Results
Advanced
  1. Other Rifles
    Are the triggers the same for the Model M/S/L the same as the SSG 69? I picked up an older Model M '06 yesterday with the type 1 non adjustable trigger. It would be fine for bench work but at under 1.5 pounds its too light in general. Steyr said I could buy the type 2 for bukoo bucks, but I see...
  2. Other Handguns
    Installing the hammer and hammer springs on the Steyr GB can be challenging because each hammer spring must be wound and its fixed (hooked) end inserted into a cavity in the underside of the sear (Figure 1). This can be done using some thin steel wire, a hook tool or dental pick, and a flat...
  3. M, C, L and S Series
    I searched "drop free" in this forum but came up craps. Any suggestions on making these mags drop free like my glocks? I had some serious trouble yesterday at our local IDPA match. Had to "rip" the mag out every damm time.
  4. Holsters
    Hello fellow Steyr users, Since we don't have any good non-leather holsters for the Steyr M9-A1 here in Austria, I treated myself to a Cleveland IWB holster. Communication with Bobby & Jeanette went realy well, and they were extremely friendly and helpful. Unfortunately I have not found the...
  5. M, C, L and S Series
    Here's the set-up. Steyr M357-A1, excellent condition. Functions 100% in every way - but one. Georgia Arms Canned Heat factory reloaded .357 SIG FMJ ammo. When fired, somewhere through a magazine, the gun will begin producing light primer strikes to the point it will not fire. Gun field...
  6. Maintenance / Tweaks / Technical Difficulties / So
    Got one of the original M357-A1's. Love the gun. Problem: With the gun completely assembled, including a mag, and uncocked, the slide can be pulled back about 1/2" then it locks. A SLIGHT pull on the trigger gives a audible "click" and the slide releases and functions normally. What's going...
  7. Other Handguns
    Today I was able to take my Taurus TCP out for a spin, and I must say she handles like a dream. Between me, my wife, and a friend of mine, the little TCP shot 80 rounds of cheap Russian ammo ($8 for a box of 50), and 50 American Eagle (or some such) flawlessly! I had no failures to feed or to...
  8. M, C, L and S Series
    Does this seem normal to you guys? This is a loaded gun with only a slight amount of pressure put on the front of the slide. It will hold back and stay held back. This gun was mfg. November of 2012. The trigger is also 7lb 11oz average by my lyman digital scale. What's up with this thing?
  9. M, C, L and S Series
    Hey guys, I've been shopping Viridian's offerings lately and I'd like a laser/light set-up but I've got a couple of questions. Which one for an M-A1? C5L? I Found a lightly used "universal" X5L locally, would that work? What's the difference between the standard C5L and Zombie edition? (Just...
  10. M, C, L and S Series
    Greetings, Purchased a M40-A1 last February, and finally made it to the range yesterday. Was a bit hesitant on purchasing this pistol because of problems fully explored on this forum. Happy, and relieved to report that the pistol functioned perfectly. Only had time to fire about 50 rounds (I...
  11. M, C, L and S Series
    TL,DR: I need a barrel for the Steyr M9 that is >6" and makes the overall length of the handgun >10.5". Do they make those? Hi guys, I live in the great People's Republic of California, where we have a roster of approved handguns. Because this requires the manufacturer to submit numerous...
  12. AUG, MSAR
    Hi everyone, Forum newbie here, and I just happen to have completed my purchase of my AUG A3 SA! I'm pretty excited about it, naturally. I fully plan on putting some form of optic on the weapon at some point, but until I decide on which, I'm itching to get out and shoot. The only question I...
  13. M, C, L and S Series
    Hi! Today at the end of my training M9-A1 refused to reset. After I came home, I noticed that catch (nr 10 on parts diagram) would not come up to catch the firing pin. When I fully disassembled the frame, I have noticed that one of the tails of catch spring (part number 12) was broken. In total...
  14. Other Handguns
    check this out! The guy is lucky he has a hand left. http://www.czfirearms.us/index.php?topic=54782.0
  15. M, C, L and S Series
    So I shot my Steyr M40 A1 for the second time today. I have shelved it and the rest of my guns because of the Ammo debacle! Anyhow I finished up teaching my NRA course and shot only about 15 rounds through it...Man I am sold!!! The gun is so under rated!!! I love the sights to. Really easy...
  16. M, C, L and S Series
    So I was so excited (and rightfully so) to order a set of Glide Rite bushings and a Lee Spring from BT that I ordered 2. Doh! Don't really need the extra set so if someone is interested I will give you a great deal on them.
  17. M, C, L and S Series
    Hi there, I sent my '05 M40-A1 into Steyr to have them fix the trigger safety not resetting all the time. I also mentioned that I sometimes have brass hit me on top of the head when firing it. They fixed the safety and replaced the extractor and ejector and sent it back to me. They were very...
  18. Maintenance / Tweaks / Technical Difficulties / So
    I bought an S40 yesterday and like my brand new S9 it is having the battery click issues. I saw someone had posted the video of polishing up the firing pin where it rolls over the roll pin, to a point I do believe that this has SOME to do with the issue. I believe the REAL issue is the firing...
  19. Maintenance / Tweaks / Technical Difficulties / So
    Gentlemen. I am new to Steyr ownership and so far my enthusiasm was kind of held back by some annoying trigger issues. My gun is a low round count M9-A1 that I just purchased used last weekend. I stripped Ms. Steyr's frame down to every pin, cleaned it, reassembled it and mounted it to the...
  20. New Member Check-In
    Ladies and Gentlemen, as of yesterday I am the proud owner of a M9 - A1 (i think). Bought the gun used, but according to the owner it has only been fired 100 times. The condition of the gun supports said claim, as the finish is immaculate and there is 0 wear on all 3 mags. Took it to the range...
1-20 of 107 Results
Top