Search Results for ‘flex’

I am thinking of getting a precision rifle in 308Win. I looked through SSG69, SSG04, CZ750, TRG22, FN A3G, and even Blazer Tac2. I found that CZ750 and SSG04 are probably best choices for me. But I heard that SSG04 stock is not good. Some guys even reported cracked stock. I know that McMillan...

Hello: New member here, I have a prohunter in .260rem that a pervious owner tried to make into a 'brush gun'. It looks like they cut the barrel with a hacksaw, recrowned it with a dremel, and, just for giggles, bored out the rifling with a drill bit. The barrel is ~17.5" from the locked bolt...

Hi all, First post. Looking to buy a Pro Hunter and would appreciate any advice. My b/g is mainly in smaller calibres and want to buy a centrefire rifle to try it out. Currently my budget is pointing towards a ProHunter, most likely in .243 (as that would be enough for the ranges I'd be...

I have a Steyr SSG 04 and was wondering if anyone here knows of a company other than mcmillian that makes an after market stock. The stock that came on it tends to flex. All advice is welcome.

I'm not overly happy with the flex in the synthetic forestock of my pro hunter. Although it hasn't caused me any real issue, when I carry it in the safari sling i can see the forestock flex towards the barrel. Im concerned that over time the substrate will develope a memory causing the forestock...

I have purchased a SSG 69 p1 with the ZFM 6x42 scope. The rifle was manufactered in October of 2004. Can anyone tell me what the elevation cam that goes from 1-8 which bullet and at what speed the cam is designed for? The reticle is the German 3 post. Regards

I was cleaning my M9-A1 last night and I'm curious if this looks normal or if it's repair. Like I said, I'm more curious than anything since the pistol functions perfectly well. Thanks

Here is one way to stiffen the forearm of a Pro Hunter stock. Cut two channels in the web of the barrel channel up to the contact point. Do not remove the rubber contact point unless you plan on doing a full bed job on the stock. Place two aluminum shafts the length of the cuts in the channel...

Yesterday I stopped by a local shop to help a buddy pick out some stuff for his first AR. As he was looking things over I saw what I knew had to be a Pro Hunter Mountain sitting on a rack that is almost entirely used rifles. Dreading the price I picked it up anyway and never put it back down...

Like a lot of Steyr owners I'm experiencing extraction problems on my M9. Namely, the spent shell is still in the chamber with the next round butting up against it. This happens mainly when the gun is warm and occurs with WWB and Blazer ammo. Thinking about it, four possible causes come to...

Check it:http://www.firearms.smith-wesson.com/store/index.php3?cat=294660&item=1576025&sw_activeTab=2 I held the pre-production prototype last month at the NTOA show in Vegas. The trigger on the prototype had a much more distinct reset than the M9, felt about as crisp and most importantly to...

Since getting my Fist IWB holster, I have been trying it on and practicing drawing, etc. Just trying to get comfortable with it. I'm having a hard time, honestly. First, the holster is very tight to the gun. I'm in the process of breaking it in, so that should get better. But it is leading...