Steyr Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 47 Results
  1. M, C, L and S Series
    I recently acquired a new S9-A1 which was manufactured in 09/2012. The firing pin spring was coated with some sort of red lubricant paste. Does anyone know exactly what it is? FWIW, I put it's first 200 rounds (Federal 115 grain FMJ RN) through it last week. With the exception of shooting a bit...
  2. M, C, L and S Series
    It's a little premature for me to panic, but I think I might have just bought a Frankensteyr despite my best efforts. I did not even think that the advertisement said M9 instead of M9A1. The other thing that should have tipped me off is that the NIB gun shipped with 15 rounders instead of 17...
  3. M, C, L and S Series
    Does this seem normal to you guys? This is a loaded gun with only a slight amount of pressure put on the front of the slide. It will hold back and stay held back. This gun was mfg. November of 2012. The trigger is also 7lb 11oz average by my lyman digital scale. What's up with this thing?
  4. M, C, L and S Series
    Greetings, Purchased a M40-A1 last February, and finally made it to the range yesterday. Was a bit hesitant on purchasing this pistol because of problems fully explored on this forum. Happy, and relieved to report that the pistol functioned perfectly. Only had time to fire about 50 rounds (I...
  5. New Member Introductions
    Quick bio: retired 62. Just started shooting Nov 2012 (What took me so long?) Took a few basic courses, and have about ten hours range time (Plus have a good friend to help). Don't own a Steyr (YET!) (Would love a C9-a1). First gun is a Ruger SR40C. And I was thinking of getting the SR9C...
  6. M, C, L and S Series
    Hello, I have a Steyr M9a1 with the date code IOW (Sept. 2010). I have not shot the pistol much but my friend is going to use it for a multi-day handgun course. Is there any way to tell if my gun has the updated extractor? I would just hate for it to be a problem mid-course. I am also...
  7. M, C, L and S Series
    I am happy I finally acquired myself a new C9-A1 handgun the other day. Ordered it in from Dave at CompactFirearms.com along with two additional 17rd mags. Instead of the listed 3 Dot sights it came with the Trap sights installed which I was pleased to see. I am liking them. Also it has a Born...
  8. Other Handguns
    Since I know there are lots of CZ fans on this board - I just purchased a new Sarsilmaz K2. Quick description - .45 ACP, 14+1, DA/SA, steel frame, 4.5" barrel, 40 oz, with rail, Turkish made - looks like the Turks are putting out some nice stuff - and under $500. Wonderful gun - may have the...
  9. M, C, L and S Series
    Hello all, new to the forum. I had read about the "hybrid" M9 9mm Steyr at Cabelas on this forum after I had already purchased one ($379.99)on 12/28, (not knowing the particulars). I must admit I was somewhat beside myself that I had not done a better job of researching what I was purchasing...
  10. M, C, L and S Series
    Hi Guys :) Hey, our Bro Jason will be in the Cleveland, OH area durin' the Xmas Holiday Season and wants ta puta few downrange with an S*-A1. Anybody out there that can help me out? Post to the thread or PM me an' I'll try and make it a seemless meet. Thanx for listenin' my Bros. :thumbsup...
  11. Other Rifles
    Hi everybody: I recently wrote a review of the SSG-69 at www.thetruthaboutguns.com. Would love to get feedback on the article, particularly if I got any "fact" incorrect. I tried to research it as best as I could, but a another few sets of eyes (from Steyr SSG-69 owners in particular) can't...
  12. AUG, MSAR
    Anyone here read German? http://strategie-technik.blogspot.co.at/2012/10/steyr-mannlicher-stm556.html
  13. M, C, L and S Series
    After more FTF's today I got mad and decided to take the M40 trigger group out and discovered the culprit!! Good old part#32 the drop safety is broken :cuss::cuss::cuss: I an going to call Monday morning to check part availability.
  14. M, C, L and S Series
    I've been having some issues with getting brass ejected directly back into my face once in a while (no FTE though), so I contacted a Canadian distributor for Steyr parts. I was sent a replacement extractor and spring. Before installing it, I took some photos of the old and new parts (old on...
  15. AUG, MSAR
    OK guys, Help me out here. I know Sabre Defense is out of the picture. Who, if anyone yet, is making the AUG A3's? If they are being manufactured are there any issues? Are there any significant changes from the Sabre Defense version? I've been out of the loop for awhile and am looking at...
  16. M, C, L and S Series
    Anyone have or had one..........................seems extremely elusive!!!!!!!!!!!!
1-17 of 47 Results
Top